Subscribe to FLO-Corp Updates

Close
Switch-Tek LP15 SuperGuard Capacitance Switch

Switch-Tek SuperGuard Capacitance Switch

Unique Features

  • Guard circuit optimizes sensor performance in coating type media
  • Rugged PP sensor and cable rated NEMA 6 or IP68
  • 1A relay selectable NO or NC via power supply wiring polarity
  • Compatible with Flo-Corp alarm, controller and fitting accessories

Typical Applications

  • The general purpose guard capacitance level switch is a great choice for a wide range of aqueous based conductive liquids with light coating, crystallizing or scaling characteristics.
  • Media examples include copper sulfate and brine.

Description

The general purpose guard capacitance level switch is a great choice for a wide range of aqueous based conductive liquids with light coating, crystallizing or scaling characteristics. Media examples include copper sulfate and brine. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The submersible sensor is universally mounted through the wall or inside the tank.

Orientation: Universal
Repeatability: ± 0.5 mm in water
Supply voltage: 12-36 VDC
Contact type: (1) SPST relay
Contact rating: 60 VA
Process temp: F: -40° to 176° C: -40° to 80°
Pressure: 150 psi (10 bar)
Cable length: 10′ (3m)
Sensor rating: NEMA 6 (IP68)
Process mount: 3/4″ NPT (3/4″ G)
Sensor material PP

Accessories

No accessories at this time

Data SheetManual