Subscribe to FLO-Corp Updates

Close
EchoSafe™ XP88/89 Explosion Proof Ultrasonic Transmitter

EchoSafe Explosion Proof Ultrasonic Transmitter

Unique Features

  • Compact XP enclosure with viewing window and dual conduit ports
  • Narrow 3″ beam diameter enables flexible installations
  • Applications with limited measurement space
  • Sidewall installations
  • Stand-pipe / Stilling Well installations
  • Rugged corrosion resistant PVDF transducer and process mount
  • Simple push button configuration enables quick setup/installation time
  • Fail-safe intelligence with diagnostic feedback for easy troubleshooting
  • Display indicated air gap or level height distance in inch or centimeter units

Typical Applications

FM approved explosion proof for use in hazardous applications

Media examples include sodium hypochlorite, diesel fuel and paint.

Description

FM approved explosion proof for use in hazardous applications, the two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8′ or 10 m, and is well suited for challenging corrosive, slurry or waste liquids. Push button calibrated, the transmitter is typically selected for atmospheric bulk storage, day tank and waste sump applications located within a classified area. Media examples include sodium hypochlorite, diesel fuel and paint. The integral display and push button module enable fast and simple calibration.

Range: XP88 8″ tp 24.6′ (20 cm to 7.5 m)XP89 8″ to 32.8′ (20 cm to 10 m) Process Temp: F: -4 to 140C:-20 to 60
Accuracy: +/- 0.2% of max. range Temp Comp: Automatic
Resolution: 0.079″ (2mm) Electronics temp: F:-40 to 160C:-40 to 71
Beam width: 3″ (7.6 cm) dia. Pressure: 30 psi (2 bar)
Dead band: XP88: 8″ (20 cm)XP99: 8″ (20 cm) Enclosure rating: NEMA 4
Display type: LCD, 6-digits Enclosure mat: Aluminum
Display units: Inch, cm or percent Window mat: Glass
Memory: Non-volatile Transducer mat: PVDF
Supply voltage: 18-28 VDC (loop) Process mount: 2″ NPT
Loop resistance: 400 max @ 24 VDC Conduit entrance: Dual, 1/2″ NPT
Signal output: 4-20 mA, two-wire Mount gasket: Viton
Signal invert: 4-20 mA or 20-4 mA Compliance: RoHS
Calibration: Push button (3- button) Classification: Explosion proof
Fail-safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last Approvals: FM: Class 1, Div 1Groups A,B,C,DClass II/III, Div 1Groups E,F,G

Accessories

AccuTank™ Ultrasonic Level Monitoring System

To receive e-mail alerts, remotely monitor, data log and configure your tank’s level, couple the EchoSafe with a Universal Process Display & DigaLink 3.0 Interactive Software. Click here to learn more


 

LM50 Side Mount Bracket – Wall Mount

Mount any 2″ NPT transducer – Allows 3″ clearance from wall – Perfect for Flow Line Options’ 3 inch beam angle. LM50-5001-01 bracket for EchoPod 1″ NPT

Download Manual

 

Data SheetManual