Subscribe to FLO-Corp Updates

Close
EchoPod™ DL14 Level Transmitter, Switch & Controller

EchoPod Ultrasonic Level Switch, Controller and Transmitter for low-cost, non-contacting monitoring and/or controlling of small tanks

Unique Features

  • Multi-function sensor provides 4-20 mA measurements, switch and control functions
  • Compact sensor with 2″ beam width and 2″ deadband optimized for small tank applications
  • Four IA relays programmable for switch or advanced pump or valve control and fail-safety
  • Rugged PVDF transducer and polycarbonate enclosure rated 6P for corrosive applications
  • Priced the same or less than floats, capacitance and resistive rods
  • WebCal® Software makes EchoPod configuration fast and east

Typical Applications

  • Ideal for corrosive or non-corrosive liquid level monitoring and control.
  • The sensor is well suited for a wide range of corrosive, sticky or dirty type media.
  • The EchoPod is broadly selected for small atmospheric tank, IBC, drum, skid or process vessel and sump applications.

Description

EchoPod is a general purpose non-contact ultrasonic level switch, controller and transmitter for small tanks 49.2″ (1.25 m) or less. Maintenance free, the EchoPod reduces tank system hardware through simplicity and consolidation. It is well suited for corrosive and dirty applications with its non-metallic housing and transducer.

Range: 49.2″ (1.25m)
Accuracy: 0.125″ (3 mm)
Resolution: 0.019″ (0.5 mm)
Dead band: 2″ (5 cm)
Supply voltage: 24 VDC (loop)
Loop resistance: 400Ω max
Consumption: 35 mA maximum
Signal output: 4-20mA, two-wire (when loop powered)
Contact type: (4) SPST relays 1A
Loop fail-safety: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Relay fail-safety: Power loss: Hold last Power on: Open, close or hold last
Hysteresis: Selectable
Configuration: WebCal® PC Windows® software interface
Temp. comp.: Automatic over range
Temperature: F: -4° to 140° C: -20° to 60°
Pressure: Atmospheric
Enclosure: NEMA 4X encapsulated, corrosion resistant & submersable
Encl. material: PC/ABS FR
Strain relief mat.: Santoprene
Trans. material: PVDF
Cable length: 4′(1.2m)
Cable jacket mat.: PVC
Process mount: 1″ NPT (1″ G)
Mount. gasket: Viton®
Classification: General purpose
Approvals: CE

Accessories

AccuTank™ Ultrasonic Level Monitoring System

To remotely monitor, data log and configure your tank’s level, couple the EchoPod with a Universal Process Display & DigaLink 2.0 Interactive Software. Click here to learn more

EchoPod Programming FOB

The EchoPod programming FOB is designed for programming the EchoPod level transmitter/switch/controller with easy-to-use WebCal software (comes free with purchase of programming FOB). Simply wire the EchoPod to the programming FOB and plug it into your PC via the standard USB port and the installed software will instantly recognize the EchoPod to be programmed. Set-up takes minutes.

Accessory: Mounting Bracket

LM50 Side Mount Bracket – Wall Mount

Mount any 2″ NPT transducer – Allows 3″ clearance from wall – Perfect for Flow Line Options’ 3 inch beam angle. LM50-5001-01 bracket for EchoPod 1″ NPT

Download Manual

 

Data SheetManual