FloaTek™ Two-Wire Float Level Transmitter
Unique Features
- Ideal level measurement solution for high temperature and pressure
- Rugged 316 stainless steel float, guide and 2″ NPT mounting plug
- Compatible with Flowline remote indicator and relay controllers
- Custom assembled to your exact guide length and span dimensions
- PP junction box rated NEMA 4X with 1/2″ conduit connector and removable terminal strip
Typical Applications
Ideally suited for relatively clean water, light oil or diluted corrosive liquids
Typically selected for high temperature and/or pressure process tank applications.
Description
The general purpose two-wire float transmitter provides contact level measurement up to 8′ or 2.4m, and is ideally suited for relatively clean water, light oil or diluted corrosive liquids. The transmitter is typically selected for high temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil.
| Range: | 6″ to 96″ |
| Accuracy: | 0.25″ over span in water |
| Specific Gravity | 0.55 minimum |
| Orientation | ± 30º from vertical |
| Supply Voltage: | 10 to 30 VDC |
| Signal Output | 4-20 mA, two-wire |
| Signal Invert | 4-20 or 20-4 mA |
| Calibration | None, fixed span |
| Process Temperature | F: -40º to 185ºC: -40º to 85º |
| Pressure | 200 psi (13.8 bar) |
| Enclosure Rating | NEMA 4X (IP65) |
| Enclosure Material | PP, UL94VO |
| Guide/Float Material | 316 SS |
| Process Mount | 2″ NPT |
| Conduit Entrance | Single, 1/2″ NPT |
| Classification | General Purpose |
| Compliance | CE |
Accessories
LM50 Side Mount Bracket – Wall Mount
Mount any 2″ NPT transducer – Allows 3″ clearance from wall – Perfect for Flow Line Options’ 3 inch beam angle.
