
EchoSwitch Ultrasonic Multi-Point Level Switch
The general purpose ultrasonic switch provides non-contact level detection up to 26' or 8m with 3 relays. Each relay can be configured on a single set point alarm, automatic fill or empty including pump alternation or duplexing control, or two set points for out of bounds alarms. The switch is well suited for a broad range of corrosive, waste and slurry media, and is broadly selected for atmospheric day tank, process vessel, pump lift station and waste sump applications.
|
Range: |
2" to 26.2' (5cm to 8m) |
|
Repeatability: |
0.25" (6mm) |
|
Hysterysis: |
LU72/75: 0.5" (1.2cm) single set point |
|
Beam width: |
LU72/75: 2" (5cm) dia. |
|
Dead band: |
LU75: 2" (5cm) |
|
Supply voltage: |
50_5: 95-250 VAC |
|
Contact type: |
(3) SPDT relays |
|
Contact rating: |
60 VA |
|
Contact fail-safety: |
De-energizes during echo signal loss |
|
Calibration: |
Target, push button |
|
Process temp: |
F: -4° to 140° C: -20° to 60° |
|
Pressure: |
30 psi (2 bar) |
|
Enclosure rating: |
NEMA 4X (IP65) |
|
Process mount: |
1" / 2" NPT (1" / 2" G) |
|
Trans. material: |
PVDF |
|
Classification: |
General purpose |
Other Level Sensor Products
Matrix of Level Sensor Products
Level Transmitter Application Success Stories