Flowmeters for Any Fluid Measurement Application

Flow measurement technology has developed over the years to a point where today we can measure just about any application. FLO-CORP offers a wide range of flow meter technologies – coriolis mass, vortex, ultrasonic, turbine, positive displacement, direct-reading flowmeters – with the majority of the content being manufactured in the United States of America. FLO-CORP engineers have the practical knowledge and thorough understanding of effective flow meter selection. No application is too difficult!

"The FLO-CORP flow meter was the only product we could find to cover the wide range of flow rates we needed to monitor. Service? What service? Because of the quality of their product we haven’t needed any service during the past five years we’ve been doing business with Flow Line Options."

Joel Tessier, General Manager of Caron Engineering, Inc.

We offer:

Low price – High quality: Our customers buy direct, thus avoiding any multi-tiered markup. The price savings is passed directly to you, our valued customers, so you don’t have to substitute high quality instrumentation for price any longer.

Fast turn-around: From application assistance, price quotations, order processing & manufacturing to shipping – usually within two weeks.

Performance guarantee: It is our commitment to every customer that your satisfaction with FLO-CORP flow meters is guaranteed, or your money back. We take the guesswork out of your flow application.

MEMFlo
Meters

Direct Reading, MEMFlo Inline Flow Meters

Rotameter replacement-MEM photoLiquid, Gas & Steam Service, featuring:

  • Accuracy: +/- 2% of full scale standard; +/-1% optional for metal units
  • Repeatability: +/-0.25% or 0.5% of rate depending on model
  • Turndown Ratio: 20:1 on average
  • Temperature Range: Up to 600°F. with special modifications
  • Pressure Ratings: From 180 to 1000 psig depending on model, construction, and temperature
  • Materials: Brass, T316 stainless, PVC, or CPVC with sight tubes of the same materials or Polysulfone or Glass

Ultrasonic
Meters

Portable transit time flowmeter photoUltrasonic Flow Meters

Transit Time & Doppler Models, featuring:

Transit Time:

  • Accuracy: +/-0.5% of reading for rates over 1 fps
  • Power: 9-28VDC or 115/230VAC.
  • Liquids Supported: Virtually all, including ultrapure liquids
  • Pipe Sizes: 1 to 100 inches
  • Environment: -40 - 300°F.

Doppler flow meter photoDoppler:

  • Accuracy: +/-2% of full scale
  • Power: 115/230VAC or 12VDC
  • Liquids Supported: 100ppm of 100 micron size suspeneded solids or aeration min.
  • Pipe Sizes: 1 to 120 inches standard
  • Environment: -22 - 160°F.

Turbine
Meters

Turbine flowmeter photoTurbine Flow Meters

Liquid & Gas Models, featuring:

  • Accuracy: +/- 1% of reading
  • Repeatability: +/-0.1%
  • Turndown Ratio: 10:1
  • Temperature Range: -150°F to 325°F or to 450°F with high temperature pickup option
  • Meter Body: T316L stainless steel
  • Rotor Shaft & Journal Bearings: Tungsten Carbide
  • Rotor: T416 Stainless Steel
  • Process Connection: Male NPT (1/2" to 2"), Vitaulic (3" to 10")
  • Max. Presure: 5000 psig up to 2" and 800 psig from 3" to 10" models

Vortex
Meters

Vortex Flow Meters

Liquid Vortex, Gas Vortex & Steam Vortex Models, featuring:

  • Accuracy: Up to 1% of reading depending on model
  • Repeatability: To 0.5% of reading
  • Sizes: From 1/2 to 72 inch pipe
  • Pressure Limits: 250 or 300 psig for most stainless models; CPVC units vary with temperature and process (consult Flow Line Options for specific applications)
  • Body Materials: PVC, CPVC and T316 stainless steel; stainless strut on most models
  • Input Power: 12 to 24 VDC or 28 VDC, and 13 to 32 VDC depending on model
  • Connections: Tube ends on PVC & CPVC units standard (other connections available as option); 2" 150 lb. flange standard on insertion units (300 lb. flange or NPT options); wafer meters mount between standard flanges

Mass
Meters

mass coriolis flow meters photoCoriolis & Thermal Mass Flow Meters

Coriolis Mass Models:

  • Flow ranges 5 to 3000 kg/hr
  • Accuracy: ± 0.5% of reading
  • Aggressive or contaminated fluids
  • Maximum temperature 250° F.
  • Pressure rating up to 5600 PSI
  • Vibration resistant
  • Accuracy of ±0.5 % of reading
  • Excellent purging & sterilization
  • Three analog outputs
  • BSP, Flange or Tri-Clamp connections

thermal mass flow meters photoThermal Mass Models:

  • Rigid metallic construction
  • Available flow ranges starting from 9 to 10 sccm up to 0 to 1000 slpm
  • Maximum pressure of 500 psig (34.5 bars)
  • NIST traceable certification
  • Built-in tiltable LCD readout (some models)
  • 0-5 Vdc and 4-20 mA signals
  • Can be used as a portable device
  • Engineering units or 0 to 100% displays
  • Totalizer option

PD
Meters

positive displacement flow meters photoPDFlo Positive Displacement Flow Meters

Feature

  • Flow ranges 0.003 to 120.0 GPM
  • Seven Flow Ranges available
  • Accuracy ± 0.5% of reading
  • Aluminum, 303 and 316 SS bodies
  • Pressure rating up to 5000 PSI
  • Pulse, mA and Voltage Sensors available
  • Economical cost
  • Bi-Directional flow capabilities

Water
Meters

water meter photoWater Meters

Industrial & Residential Styles, featuring:

  • Meet AWWA C-700 Specifications for accuracy and capacity
  • Pressures to 222 psig and temperatures to 225°F. (ratings depend on model & materials)
  • Suitable for apartment water consumption measurement, boiler and cooling tower water treatment, water softening regeneration, batch processing, and alarm systems

Purge
Meters

water meter photoLow Flow Rotameters (Purge Meters)

  • Precision instrument embodying the inherent simplicity, versatility and economy of the classical rotameter
  • Suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating, etc.

Medium Flow Rotameters:

  • Heavy-duty flow meters are fully enclosed in a brushed stainless steel case.
  • Ideal for industrial applications with flow rates up to 116 GPM and 250 SCFM.
  • Used with industrial water and air service.

Process
Displays

flow computers and batch or blending controlsFlow Computers & Process Monitors

Several different styles, featuring:

  • Fluid flow measurement of rate, total, and/or accumulated total
  • High and low alarm functions
  • Blending & batch control
  • Most are loop powered
  • Watertight to IP67 (Nema 4X) enclosure
  • Variety of mounting options

Open
Channel

Parshall flumes and other open channel measurement flumesFlow Measurement Flumes:

Engineered for measuring the flow of water in open channels, our flumes are made of fiberglass reinforced polyester (FRP). They are also available in vinylester or Atlac Bisphenol A polyester for extremely severe effluents.

Flumes are also available in stainless steel when required. Fire retardants may be added to resin, when required.

We also offer a variety of related water and wastewater products.

Flow
Calibration

Flow System testing bench photoFlow Calibration & Testing Services:

We offer both N.I.S.T. traceable calibration of a variety of flow meter types, and the ability to build custom benches and systems for flow measurement or using flow to check manufactured components.

We can also perform flow testing for valves and fittings to develop flow verus pressure drop data and formulae.

Your inquiries are welcomed. Standard turn-around on most standard meter calibrations is five business days.