MEMFlo flow meters for liquid, gas, steam - photoMEMFlo Direct-Reading Industrial Flow Meters for Liquids, Gas & Steam

Flo-Corp manufactures industrial Flow Meters, Flow Switches, and Flow Instrumentation.

All MEMFlo meters offer:

MEMFlo flowmeters simple design provides an accurate meter for just about any liquid, gas or steam application. The MEMFlo meter is a volumetric meter that does not require any straight runs of pipe and is built to last for decades. In use for over 30 years, the MEMFlo meter has now been upgraded with a wide range of electronic options.

MEMFlo Meter Quick Reference Guide

"When our other meters started melting, we had to go with a pipe by-pass and literally adjust burners by eye. By installing MEMFlo meters and fine-tuning our process, we actually chopped about $18,000 the first month off our oxygen bill. That’s a pretty good sized number!"

– Mr. Chip Turner, Facilities and Furnaces Manager

MEMFlo
Benefits

* Wide flow range that is 2 to 3 times of most flow meters.

* Low Maintenance - No springs, cams or dynamic seals to wear out. Electronics options never come in contact with the fluid media.

* Fast, easy in-line disassembly - all of these meters can be disassembled and reassembled in less than five minutes while the body remains in the pipeline. The meter can be cleaned in place, or new flow internals installed to change the capacity or service.

* No fragile parts to replace - less than 1% of our sales have been for replacement parts. The MEMFlo meter provides years of service without the need to replace parts. Our replacement parts are a fraction of the cost of the meter and they are in stock in Ohio.

* High quality at an economical price - our Direct-Reading Flowmeters cost up to 70% less than industrial rotameters. Our low ∆P's translate into lower operating costs.

* Easy installation - these flowmeters require no special meter runs. Installation is typically one-tenth the cost of an orifice plate and flanges.

* Good accuracy & easy readability - standard accuracy is ±2%, with ±1% optional. Repeatability to ±0.25% of rate. Flows can be read even in dirty fluids over the entire range.

* Electronic options - including alarm switching, 4-20mA outputs, and digital with totalizing displays.

* Broad application capabilities - Meters to 500 GPM or 5750 SCFM are offered in brass, T-316 stainless steel, PVC, CPVC, and P-72 copolymer for wet chlorine service. High pressure units for up to 5000 psig, or meters for vacuum service can be provided.

* Quick deliveries - Standard delivery for most products is one to two weeks. If you need a meter sooner, we offer a special 24-48 hour express service for our most popular models. Call us today and ask about the MEMFlo flow meter for your liquid, gas or steam application!

Metal
Meters

MEMFlo Thru View and All Metal industrial flow meters offer standard 3/4" and 1-1/2" female NPT connections, and flow ranges up to 120 GPM liquid, or 1000 SCFM gases.

Series T flowmeters are similar, but with flows to 500 GPM or 5750 SCFM in sizes of 2" through 4" NPS.

Standard materials for all three MEMFlo series include brass and T316 stainless steel, and all metal versions may be used for saturated steam service.

Plastic
Meters

All wetted PVC or CPVC construction make these meters ideal for highly corrosive fluids used for water treatment, electrogalvanizing and pickling lines, as well as deionized water service.

MEMFlo P-72 Flow Meters are made from a unique copolymer designed for caustic and wet chlorine applications found in the chlor-alkali industry.

The thermoplastic meters above come in sizes from 3/4" through 4" female NPT, socket, or flanged connections for flow ranges of 0.54 thru 500 GPM liquids, 3.20 thru 5750 SCFM gases.

RangeMaster
for Combustion

RangeMaster Flow Meters are designed specifically for low pressure, low density gas measurement. Offered in electroless nickel plated steel or stainless construction, the average pressure drop is only 2-1/2" water column. RangeMasters provide accurate measurement of combustion fluids on burners, annealing atmospheres, vacuum flows, & methane from land fills & digesters.

Offered in sizes up to 4" NPS, models cover flow ranges of 20 thru 30,000 SCFH standard.

Electronic
Accessories

The MFT Transmitter is a 4-20/0-5Vdc or 0-10Vdc two-wire transmitter with a digital display of rate and total flow. The KIST two-wire transmitter offers Two-Wire 4-20mA remote output with a direct reading scale, and the Flo-Sentry Flow Alarm is a single or dual flow alarm in AC or DC voltage options. Pressure and temperature analog outputs are also available.

PDF Specifications: MFT Transmitter | Flo-Sentry | Flo-Guardian | KIST

Engineered
Products

As the only manufacturer of these unqiue flow meters, Flo-Corp can provide custom modifications to suit your application. Our engineered products include Series H Flowmeters for high pressure, Flow Sentinel Flow Switches, & related flow products or systems. We can provide a variety of product & design services, & invites your inquiries.

Other helpful MEMFLo information: MEMFlo Meter Sizing Calculators | MEMFlo Meter Selection Tips | 10 Reasons to Use MEMFlo Meters