RangeMaster™ MFRM Flow Meters for low pressure, low density gases
Unique Features
- Tough, simple & accurate meters for low pressure, low density gas measurement.
- Extended flow ranges averaging 30 to 1.
- Verifiable accuracy for combustion gases, annealing atmospheres, vacuum flows, digesters, and gas mixing.
- Average pressure drop is 2 to 3″ water column.
- Disassembles in less than a minute without removing the meter from the pipeline.
- Float bounce is eliminated by filling the sight tube with dampening fluid.
- Rugged steel and stainless steel constructions with standard pressure ratings of 150 psig for maximum safety.
- No springs, cams, or seals to wear out.
- Standard 3/4″ thru 4″ female NPT connections or optional flanges.
- 360º rotation of scale. Special scales & multiple scaling offered.
- Economically priced.
Typical Flow Applications
- Combustion fuel and atmosphere flows to furnaces
- Oxygen flow for furnaces
- Digesters
- Vacuum flows
- Annealing atmospheres
- Gas mixing
Description
SupraFlo MFRM™ RangeMaster Low Pressure Gas Flow Meters are simple, accurate, meters for use in industrial gas applications. These meters measure flow to one percent accuracy and are ideal for low pressure, low density gas. Unlike tapered tube rotameters, the SupraFlo MFVC flow meters have an indicator disk in close proximity to the edge of the sight tube for visibility. Alternatively, magnetic indication is available for accurate reading. The sight tube is filled with dampening fluid to eliminate float bounce. And these meters can be supplied with MFT™ 2-Wire Transmitters for digital flow rate and total indication.
Accessories
- Pressure Gauge installed on the meter
- Safety Guard Tubes
- Flo-Sentry II™ Alarms
- MFT™ Two-Wire Transmitters & Digital Displays
